When planning a deck project, you might calculate the square footage of your finished deck and order that exact amount of decking. However, ordering the exact amount isn’t always the best idea. You’ll need to cut boards to fit your deck, work around corners and obstacles, and account for the occasional mistake or damaged board. Having a little extra material can save you time and frustration, both during construction and down the road.
As a general rule, it’s a good idea to order 10% to 15% more decking than your project requires. The amount you’ll need depends on your deck’s layout, board lengths, and installation pattern.
How Much Extra Decking Should You Order?
For most deck projects, ordering 10% to 15% extra is a good starting point. A simple rectangular deck will usually have less waste than a deck with multiple corners, angled cuts, or a more complicated design.
Here’s a general breakdown:
| Deck Layout | Recommended Extra Decking |
| Simple rectangular deck | 10% |
| Multiple corners or obstacles | 10 – 15% |
| Diagonal decking pattern | 15% or more |
| Complex layouts with multiple angles | 15% or more |
These are estimates, not hard-and-fast rules. Your actual waste will depend on the deck’s dimensions, the lengths of the boards you order, and how well you can plan your cuts.
For example, if your project requires 500 square feet of decking, ordering 10% extra means you’ll need enough material to cover 550 square feet. If you order 15% extra, that increases to 575 square feet.
What Causes Decking Waste?
Even with careful planning, you’ll probably have some leftover material when your deck is finished. Here are a few things that can contribute to waste:
- Cutting boards to length: Not every leftover piece will be long enough to use somewhere else. This is especially common when working with longer boards.
- Angled cuts and deck designs: Diagonal patterns, picture framing, stairs, and multiple corners can require more cuts and create additional waste.
- Measurement mistakes: Cutting a board too short or making an incorrect measurement can happen, even with an experienced installer.
- Damaged boards: Boards can occasionally get damaged during shipping, unloading, or installation.
Planning your cuts and board lengths ahead of time can help reduce waste, but it’s always a good idea to have a little extra material available.
Why Is It a Good Idea to Order Extra Decking?
Extra decking isn’t just helpful during installation. It can also save you trouble if you need to make repairs later.
Avoid delays during construction. Running out of decking before the project is finished can put everything on hold. You’ll have to order more material and wait for it to arrive, which could delay your project or require rescheduling your contractor.
Have extra boards for future repairs. If a board gets damaged a few years down the road, finding an exact match isn’t always easy. Decking colors and product lines can change or get discontinued, and natural wood boards can vary in appearance. Keeping a few extra boards from your original order gives you a better chance of finding a close match.
Just make sure you store any leftover decking in a dry, protected location so it’s in good shape when you need it.
Don’t Forget About the Details
When figuring out how much decking to order, don’t forget about areas beyond the main deck surface. Stairs, picture framing, breaker boards, and borders all require additional material.
It’s also worth thinking about the board lengths you’re ordering. Choosing the right combination of lengths and planning your cuts ahead of time can help you get more out of each board and reduce waste.
Final Thoughts
Ordering just enough decking might seem like a good way to save money, but it can cause problems if you run short or need to replace a board later.
For most projects, ordering 10% to 15% extra is a good starting point. If your deck has a lot of angles or a more complicated layout, you may need a little more.
Having extra boards on hand gives you more flexibility during construction and can save you the trouble of trying to find matching material down the road.
Ready to start your deck project? Check out our selection of hardwood, composite, and PVC decking at AdvantageLumber.com.

Frequently Asked Questions
How much extra decking should I buy?
For most deck projects, plan to order 10% to 15% more decking than you need. Simple layouts may require less, while diagonal patterns and more complicated designs may require additional material.
Is 10% extra decking enough?
For many straightforward deck projects, 10% is a reasonable allowance. If your deck has multiple angles, stairs, or picture framing, you may want to plan for 15% or more
Should I keep leftover decking?
Yes. Keeping a few extra boards is a good idea in case you need to make repairs later. Finding an exact match can be difficult if the original product or color is discontinued.
Does diagonal decking require more material?
Generally, yes. Diagonal patterns require more angled cuts and can create more leftover material than a standard straight-board layout. Planning for at least 15% extra is a good starting point.

